THE LOCAL
THE LOCAL
THE HARD TAIL WORK HORSE IS BACK
Our dirtjump masterpiece, the Faction II, returns from the shadows. Now available in frame only and complete build options.
SIMPLE AND STOUT
This dirt slayer is the perfect companion for flowing big lines all day, with a sturdy build and a backbone forged from steel. Simple, stout, and clean, just as a DJ ought to be.
We've amplified the simplified with this limited run of complete builds to save you some internet noodling. From the top shelf, just behind that half-drained bottle of Patrone, sits the trusted RockShox Pike DJ fork. At its bow and stern, the Faction II spins a set of 26" Novatec Crisp hoops shod in Maxxis DTH tread to grip the earth or concrete. A fully Evil cockpit is poised above for that skate park or trail rip into the ether, and a single SRAM G2 stopper will pull you back from the edge.
No two landings are identical, and The Faction II comes in three sizes to accommodate your body and style. If you're mostly made of legs, or you prefer a mountain bike feel in your DJ, the large will be a welcome companion. For added BMX character and shorter inseams, one of the smaller sizes may hit the fit. Faction frames offer the angles you want to float a few meters above the earth.
THE DEVIL IS IN THE DETAILS
STEEL IS REAL
The Faction 2 frame is is constructed out of Reynolds 520 steel tubing to provide strength and durability.
TAPERED HEAD TUBE
A new taller tapered head tube to fit modern dirt jump forks and give you that boost you were looking for..
BMX-STYLE HORIZONTAL DROPOUTS
BMX style horizontal dropouts and mid BB bottom bracket.
| GEOMETRY | SMALL | MEDIUM | LARGE |
|---|---|---|---|
| A - Head tube angle | 69.5 | 69.5 | 69.5 |
| B - Seat Tube angle | 71.5 | 71.5 | 71.5 |
| C - Virtual top tube length | 580mm | 22.8" | 590mm | 23.2" | 605mm | 23.8" |
| D - Seat tube length | 320mm | 12.6" | 320mm | 12.6" | 320mm | 12.6" |
| E - Bottom Bracket Height | 323mm | 12.7" | 323mm | 12.7" | 323mm | 12.7" |
| F - Head tube length | 115mm | 4.5" | 115mm | 4.5" | 115mm | 4.5" |
| G - Chain stay length min | 381mm | 15.0" | 381mm | 15.0" | 381mm | 15.0" |
| G - Chain stay length max | 397mm | 15.6" | 397mm | 15.6" | 397mm | 15.6" |
| H - Wheel base min | 1016mm | 40.0" | 1026mm | 40.4" | 1041mm | 41.0" |
| H - Wheel base max | 1032mm | 40.6" | 1042mm | 41.0" | 1057mm | 41.6" |
| J - Axle to Crown | 482mm | 482mm | 482mm |
| K - Offset | 40mm | 40mm | 40mm |
| L - Stack | 521mm | 20.5" | 521mm | 20.5" | 521mm | 20.5" |
| M - Reach | 389mm | 15.3" | 399mm | 15.7" | 414mm | 16.3" |
| N - Sizing | 5'0"-5'7" | 5'7"-6'1" | 6'1"-6'4" |
| COMPONENT | SMALL | MEDIUM | LARGE |
|---|---|---|---|
| Stem length | 35-50mm | 35-50mm | 35-50mm |
| Stem rise | 0-5 | 0-5 | 0-5 |
| Handlebar rise | 35-50mm | 35-50mm | 35-50mm |
| Handlebar width | 710mm-800mm | 710mm-800mm | 710mm-800mm |
| Crank Length | 170mm | 170mm | 170mm |
| Sizing | 5'0"-5'7" | 5'7"-6'1" | 6'1"-6'4" |
| Available Sizes | Small, Medium, Large |
| Frame | Reynolds 520 Steel |
| Fork Axle Crown Length | 482mm |
| Fork offset | 40mm |
| Headtube | Tapered 1 1/8 |
| Headset | FSA NO.42/ACB, Upper 42mm, Lower 52mm |
| Seatpost Diameter | 27.2mm |
| Rear Wheel Diameter | 26 |
| Maximum Rear Tire Size | 26 |
| Bottom Bracket Sheell | Mid BB |
| Chainline | 50mm |
| Chainguide Mount | n/a |
| Max Chainring Size | 28t single ring |
| Rear Wheel Spacing | 135 x 10mm |
| Brake Mount Type | IS Standard |
| Max Rear Rotor Size | 160mm |
WHAT SIZE SPINDLE DOES THE FACTION II USE WHEN RUNNING BMX STYLE CRANKS? The Faction II works best with 153mm/6″spindles.
WHAT IS THE WARRANTY ON THE FACTION II? 3 Year limited warranty
WHAT TYPE OF HEADSET DOES THE FACTION II USE? The Faction II uses a FSA NO.42/ACB, Upper 42mm, Lower 52mm headset.
WHAT IS IT MADE OF AND HOW MUCH DOES IT WEIGH? The Faction II frame is made from Reynolds 520 Chromoly, weighing in at 4.8lb, give or take. Light enough to spin circles, sturdy enough to return from orbit.
WHAT SIZE WHEELS & TIRES DOES MY BIKE FIT? 26" ain't dead! A 2.3" tire will leave you ample clearance.
WHICH BOTTOM BRACKET (BB) STANDARD DOES MY BIKE UTILIZE? The Faction II utilizes a BMX-style, Mid bottom bracket. We recommend pairing your BB & crankset brands to assure compatibility.
WHAT TYPE OF STEERER TUBE DOES MY BIKE REQUIRE? The Faction 2 requires a tapered steerer (1 1/8" - 1 1/2"). You can run a straight-steerer (1 1/8") fork with an adapter crown race.
WHAT IS THE SHORTEST STERRER TUBE I CAN GET AWAY WITH? With zero spacers, assuming a stem stack height of 40mm, your Faction 2 requires a steerer length of no less than 165mm. That's frame, headset, stem. That might vary depending on which stem you're running, but best stay safe out there, kids.
WHAT IS MY BIKE'S REAR AXLE SPACING? The Faction 2 utilizes 10x135mm BMX-style horizontal dropouts
WHAT TYPE OF BRAKES CAN I RUN? Disc-only, 160mm rotor maximum with an IS Standard brake mount. Or none if you fancy yourself a street-hoppin', hot-dog (Evil Bikes does not encourage brakeless riding).
I'M HAVING TROUBLE KEEPING MY AXLE IN PLACE. Ease-up on the protein powder there, Schwarzenegger. Try employing some chain tensioners (aka: axle tuggers).
CAN I RUN A DERAILLEUR? No- the Faction II is a single speed-specific frame.
WHAT SIZE IS THE SEATPOST? The Faction II uses a 27.2mm seat post and has an integrated seat clamp.
