Following LS FAQ

FRAME

Where can I find an exploded view diagram of my bike?   You've come to the right place!  Here

What is the warranty on my bike? Limited Lifetime Warranty information can be found here:   https://www.evil-bikes.com/pages/warranty-policy 

How do I adjust my Flip Chips? Remove upper and lower bone link bolts on each side, then remove the 3 flip chip bolts from each side. Flip your Chips 180deg on a horizontal axis. The desired position is noted on the upward facet. The Flip Chip position will be visible when sitting on the bike and should read Low/X-Low depending on model.  

What is the paint code on my bike?  Foam Roller - Pantone 566C  or Black - Matte Clear Coat Pantone Black C

DRIVETRAIN

Which bottom bracket (BB) standard does my bike utilize?  It utilizes a threaded BSA 73mm bottom bracket. We recommend pairing your BB & crankset brands, to assure compatibility.   

My chainring is slightly off-center in the upper guide.  

• If the chainring is too far inboard, try adding one drive side BB spacer.   
• If the chainring is too far outboard, try removing one drive side BB spacer and placing that on the non-drive side.   
• If neither of these solutions address the issue, your cranks, or chainring may not accommodate the appropriate chainline. 

What crankset spacing does my bike require? It requires a SuperBoost crankset w/ 56.5 mm chain line. We spec a 3mm offset Chainring with SuperBoost+ width Cranksets for most cranksets.  Boost cranksets cannot be modified to work with this frame.   

What are my allowable chainring sizes?  Round: 30-36t / Oval: 32-34t  

Does my bike accommodate a 2x drivetrain?  No. It has an integrated 1x upper chain guide.   

Will my bike accept an aftermarket chain guide? Yes. Custom ISCG05 tabs to accommodate aftermarket lower chain guides & bash guards.  

What derailleur hanger does my bike use? SRAM UDH (Universal Derailleur Hanger).

WHEELS

What is my bike's rear axle spacing?   SuperBoost (12x157mm) rear spacing.

What size wheels & tires does my bike fit?  It's designed to accommodate 29" wheels with (up to) 2.6" tires.   Front tire clearance is dependent on your fork manufacturer's specifications.

SEAT/POST

What  seat post  diameter does my bike utilize? A 30.9mm seatpost.

What  seat post  clamp diameter does my bike utilize?  34.9mm clamp 

What is the longest dropper post I can run? 

Please email info@evil-bikes.com with the following information: 

• Your BB center to seat rail center measurement, in the pedaling position.  
• Crank length- should be noted on the medial (center-facing) side of your drive-side crank.  
• Which dropper post(s) you are looking at.   

Our service robots will promptly get back to you with options. If you prefer to do the math yourself you can find the seat tube length on row "D" of the Offering LS geometry chart on our website. Maximum insertion depths are as follows:   

Small	Medium	Large
205mm	250mm	255mm

BRAKE

What type of brake mount does my bike have? It utilizes a 180mm Post Mount rear. Front is dependent on your fork's make & model. Please see your fork manufacturer's website for exact specifications.

What is my maximum rear brake rotor size?  It accepts up to a 203mm rotor.

HEADTUBE

What type of headset does my bike require?  It requires a (Zero Stack) ZS44, ZS62 headset. Few alternatives exist. Consult info@evil-bikes.com if you have a headset that you are unsure about.   

What type of steerer tube does my bike require?  It requires a tapered steerer (1 1/8" - 1 1/2").  

What is my frame's minimum steerer tube length? 

With zero spacers, assuming a stem stack height of 40mm, your Following LS requires a steerer length of no less than: 

Fork manufacturers recommend no more than 30mm of spacers between stem and the upper race. The provided measurements account for 0mm additional stack height (no spacers between stem & dust cap), with a 40mm stack height stem.

SUSPENSION

How much fork travel can my bike accommodate? The Following LS is recommended to be paired with a 120mm-130mm travel fork. 

How much travel (suspension) does my bike have?  The Following LS has 121mm of rear wheel travel. Recommended fork travel (front) is 130mm.

What size shock does my frame utilize?  The Following LS utilizes a 165x45mm Trunnion-mount shock. 

 What size shock mount hardware does my bike require?  The Following LS utilizes a Trunnion-mounted upper and requires 8x20mm lower shock mount hardware.

What approved shock options are available? 

Make	Model	Approved EVIL Spec
Rockshox	Deluxe Ultimate	RS DLX ULT RCT 165X45 DB2MM 380TS B2
Rockshox	SID Ultimate	RS SIDL ULT RI 165X45 SA1ML1 430TS A1
Fox	DPS	Fox DPS 2021, FLOAT DPS, F-S, K,3pos-Adj, Trunnion, Evol LV, Evil, Following, 165, 45, 0.8Spacer, LCM, LRM, CMF, Neutral Logo

It is important to note that each EVIL frame requires a specific damper tune. Often, a standard off-the-shelf tune will not capitalize on the inherent qualities of the DELTA linkage. Other options may exist. If you are interested in a damper that is not specified on this list, please consult our friendly customer service team at info@evil-bikes.com.